A virtually pain free procedure
Accent®XL is designed to be a freestanding, portable unit and requires minimal site preparation. It uses a standard wall outlet and transports easily from room to room or between facilities.
| up to 300 W (±5%) | |
| Unipolar, UniLarge, BiPolar | |
| 40.68 MHz (±2Khz) | |
|
100-120 VAC, 5 A, 50/60 Hz 208-240 VAC, 2.5 A, 50 Hz |
|
| 110 lbs. (50 kg) | |
| 21" x 17" x 38" (54 x 44 x 97 cm) |
Safety features come standard
All AccentXL systems come with a limited 1-year warranty. You'll receive the console, a choice of two of the three available RF handpieces, a dummy (null) handpiece, and the following parts:
- 2 keys
- 1 non-contact thermometer
- 1 power cord
- 1 operator's manual
- 1 interlock
- 1 initial AccentXL marketing Starter Kit
- Treatment oil
- Water filling/draining kit
- On-site installation/In-service training (1 day each)
- Advanced Operator Training (a $2,000 value)
Shipping and installation requirements
AccentXL can be shipped anywhere. It needs no special receiving facilities, as it is small enough to fit on any elevator. Site preparation should be minimal.
- It uses any standard wall outlet
- Space should be allocated with adequate ventilation and free air flow
- The system should be connected to a dedicated circuit
- There is no need to ever add water
- Room temperature should ideally be between 68 to 77°F (20 - 25°C), with a relative humidity less than 80%.